SVP 950 M/A
The Putsch® precision panel saw SVP 950 model is a highly robust, top-of-the-line machine for industrial use such as furniture construction, curtainwall manufacturing, timber milling and in DIY stores.
The primary differences from the SVP 133/145 models include the larger frame for longer cutting lengths, a large high-performance motor and larger saw blade to cut thicker material.
The sturdy reinforced steel frame is the foundation of every Putsch® precision panel saw. The fully welded construction is robust and torque-proof, contributing to quick and simple installation and calibration of the frame.
The meticulously manufactured solid frame provides a reliable base for long, trouble-free production.
The design of the vertical panel saw requires half the floor space of a horizontal panel saw.
The standard base frame is designed for cutting lengths of up to 5300 mm.
Upon request, we can extend the length of the frame up to 15 meters.
Putsch® offers an optional wall-mounted design, as well as a modular portable frame for especially tight installation conditions.
Dust collection systems
The main extraction of dust particles during vertical and horizontal cutting is via an integrated dust extraction system within the saw motor. This system is directly connected to an outside dust collector.
Putsch® precision panel saws are equipped with secondary integrated extraction systems in the support panel. This significantly reduces fine dust levels in the work space and protects operators from potential health hazards.
TRK – Dust Extraction System
The TRK dust extraction system is integrated into the frame and is included as a standard part of the system. The vacuum channel is located on the right side of the frame and extends over the entire working height. It works continuously during vertical and horizontal cuts and sends dust into the extraction filter. The TRK dust extraction system is EU-tested for wood dust and fulfills all statutory worker protection directives.
ECO Dust Extraction System
To process particularly dustprone materials such as gypsum, we offer an optional ECO dust extraction system. The system consists of several vertical vacuum channels integrated into the grid directly behind the vertical cutting position of the saw blade.
When the carriage is locked into the vertical cutting position, sensor-controlled automatic valves open only the required cutting channel. This way the suction power of the entire system is concentrated on the one cutting position.
The generously dimensioned galvanized pipe system carries the dust/air mixture to the attached independent vacuum unit. When The saw head assembly is positioned horizontally the channel valves close automatically and suction occurs within the saw head and through the TRK vacuum attachment on the right side of the saw.
Automatic shifting grid
Mounted to the saw frame is a shifting grid to support the panels during cutting. This grid is moved by an automatic shifting device that allows the saw blade to evade the grid edges during horizontal cuts and prevent damage to the machine. A sensor on the saw carriage initiates the shifting process by way of a fully-automated electric motor.
Support Surfaces/Support Rollers
On the bottom of the frame there are secure and stable panel support feet. They consist of individually replaceable aluminum supports with phenolic soles. The calibrated alignment of the panel supports to the top of the saw bridge guarantees absolutely true horizontal cuts.
Rubberized lifting rollers enable the positioning of large and difficult panels on the frame. An optional indicator light indicates when the rollers are in motion. Like the aluminum panel support feet, the rollers can be individually replaced as needed.
In order to cut small pieces of material into angular shapes, Putsch® offers an angle cutting attachment. This device can be installed on the saw frame with a few simple steps and allows for adjustment to a wide range of cutting angles using an attached scale.
Two flip stops for vertical cuts
Every Putsch® precision panel saw is equipped with two sliding flip-stop guides for vertical cuts. They enable quick and precise setting to the desired cut length. Putsch® offers optional flip-stops with an integrated digital measurement display to allows settings for vertical cuts that are precise within 1/10 mm.
Retractable middle support shelf
A retractable middle support shelf is integrated into the center of the saw support grid of the saw for short, light materials. This supplemental support fence runs parallel to the bottom beam of the saw frame, extending across almost the entire length of the machine. This offers your personnel an ergonomic working height when handling smaller materials.
Sliding support backer for thin panel materials
An optional sliding support backer is available and can be integrated into the support grid. This accessory makes it easy to position thin pieces on the central support grid.
An optional low-level flip-stop is available, which is installed at the bottom of the support grid. This makes it easier to position heavy panels resting on the bottom support feet.
The saw bridge serves as a horizontal and vertical guide for the saw carriage. It rides on precision ballbearing rollers along the upper guide rail of the saw that is perfectly parallel to the bottom rail of the saw frame. The mechanical positioner locks the saw bridge securely in the vertical cutting position.
A measuring scale is located on the saw bridge that can be used for horizontal cut measurements. It extends from the bottom of the carriage and the center of the carriage. For recurring horizontal measurements, programmable cams can be individually adjusted for up to four repeat cutting heights.
An optional horizontal repeat strip cutting device can be mounted on the saw bridge. This adjustable device makes it possible to quickly and precisely cut multiple same-size horizontal strips.
The saw carriage serves as the guide for the saw motor assembly. Using lightweight aluminum components and precision ballbearings, the carriage slides resistance-free vertically on the guide rail of the saw bridge.
Saw drive unit
The saw motor assembly of the Putsch® precision panel saws is located on the saw carriage. The saw head can tilt 90° which makes it possible to cut both vertical and horizontal cuts on the same material. A reliable high-performance motor turns the saw blade.
To prevent chipping and tearing along the edge of laminated materials, an optional scoring attachment with two scratch knives is available. They score the surface for a clean cut on glued edges.
The cut area is protected by a saw blade cover that also serves as a dust seal for increased dust extraction efficiency.
Primary dust extraction is through the saw head assembly. Wood dust, fine particles and chips are directed onto the saw blade and are removed through a flexible plastic tube that is connected to an external dust filter.
Ergonomic handles control the plunging of the saw head along cylinder guides. These guides allow a maximum 60 mm cut depth. A joint on the lower handle allows relaxed and comfortable operation when working overhead.
An optional adjustable depth-stop can be fastened to the saw head for accurate grooving.
Putsch® offers a kit to easily convert the saw head for sandwich and aluminum composite panels. The kit contains the grooving cutter for your desired profile, the appropriate protective cover, and a depth-stop to control the insertion depth of the saw head.
The operation of the SVP 950 M series is governed by a control panel mounted to the vacuum tube next to the saw bridge. In the manual version this is how the saw blade motor is turned on and off. This is also where the emergency safety stop is located.
SVP 950 A Automatic Version
The SVP 950 is also available in an automatic version. The difference between the automatic and the manual version is that the shifting frame is operated pneumatically.
When activated, the automatic control moves the saw head to the starting position, plunges the saw blade into the material, guides the carriage horizontally or vertically in two feed speeds, withdraws the saw blade, and if desired repositions the saw bridge back to the starting position. This shortens the entire cutting process for your operating personnel with a single push of a button.
All Putsch® precision panel saws meet or exceed the European Union standards and guidelines for safety. All mechanical and electrical components are subject to testing and certification from independant testing agencies.
Range of ApplicationsPutsch® precision panel saws have been used sucessfully for decades for a wide variety of applications. The multitude of available models and component options allow processing of a wide range of panel materials and dimensions.
Equipment and Accessories
SVP 950M SVP 950A Saw frame The TRK dust extraction system (EU-inspected for wood dust) is integrated into the frame, greatly reducing the fine dust levels to levels significantly below the TRK (technical target concentration) reference levels. standard standard The ECO dust collection system with pneumatic valve control for vertical cuts. Efficient supplemental dust collection via vertical cutting channels for highly dust-prone panel materials, such as gypsum. optional optional Automatic electric shifting grid. Controlled by sensors, the shifting grid automatically aligns the saw blade to protect the grid strips. standard standard Pneumatically raises and lowers the feed rollers. Practical, comfortable, functional. n/a n/a Sensor-detection of raised feed rollers. Feed rollers with control lights. No more hassle of forgetting the raised feed rollers. optional optional Two flip stops for vertical cuts. Makes it possible to make measurements on both sides of the saw bridge. standard standard Retractable small material middle support fence that extends over the entire working length of the machine. Small material can easily be cut upright in the center of the grid. standard standard Optional low-level flip stop for heavier panels (such as kitchen countertops) which can be securely cut on the bottom support feet. standard standard Sliding support brace for thin materials. Prevents flexing of thin panels when they are cut on the retractable support fence. optional optional Sensor that detects the edge of the panel. The saw head lifts out and the saw bridge returns to the starting position. n/a n/a Angle-cutting device. In a few easy steps, this device can be fastened onto the bottom of the frame for precise angle cuts. optional optional “CS” Clamping System. Panel lifting system for the accurate trimming of sheet materials. n/a n/a Saw motor assembly, saw carriage, saw bridge Linear precision guide rails on the saw beam. Precise cutting through perfect alignment of the carriage and the saw head. Easy to replace if damaged. n/a n/a Linear precision guides on saw head. Precise plunging of the saw blade through torsion-resistant linear guide rail. n/a n/a Semiautomatic vertical movement of the saw head with fast/slow button. Convenient time and effort saving function for automatic models. n/a n/a Automatic motor-driven plunging of the saw head. Practical and functional; ideal for overhead work and taller panels. optional standard Automatic turning of the saw head from vertical to horizontal cut position and vice versa Effort-saving, functional n/a n/a Pneumatically engaged, independent scoring motor with twin scoring blade. Activate scoring blade with the touch of a button. Very low-maintenance drive technology with separate drive motor. n/a n/a Manually inserted scoring system with twin scoring blade and independant scoring motor. Easy, manual activation of the saw blade scorer with automatic on/off n/a n/a Twin blade scoring without separate drive motor. Scoring blade is activated by the motor’s drive shaft n/a n/a Scorer with two hard metal blades. Especially suitable for scoring on thin laminated panels optional optional Automatic locking saw carriage for horizontal cuts Makes tall overhead work easier optional optional Pneumatic lockable saw beam for vertical cuts Manually locking the saw carriage is no longer necessary. n/a n/a Automatic saw beam and carriage return with 2 adjustable feed speeds (12 m/min - 24 m/min) for vertical and horizontal cuts. The automatic functions save time, effort and increase material output. n/a standard Automatic saw beam and carriage return with adjustable feed speeds (4 m/min - 20 m/min) for vertical and horizontal cuts. The variable speed feed control uses an inverter for fine adjustment based on material type. n/a n/a Vertical measurement digital display Enables accurate, to the decimal, measuring of vertical panel dimensions. optional optional Horizontal measurement digital display Enables accurate, to the decimal, measuring of horizontal panel dimensions. optional optional Four programmable cams for horizontal cuts Commonly used cut dimensions can be preset on the saw beam for quick recall as needed. standard standard Horizontal repeat strip cutting device Easy-to-set device for cutting multiple same-size horizontal strips. standard standard Sandwich panel and Alucobond® processing kit with depth stop. Kit includes pressure pad for the insertion of a groove-cutter and includes a depth stop. optional optional Depth stop for groove-cutting Sets the saw blade at a fixed depth when working with a base panel, including very thin panels. optional optional Wall-mounted model A vacuum hose and cable run the entire frame length in a space-saving energy chain. The frame can be mounted directly to a wall without supporting struts to save floor space of approximately 20 cm deep. optional optional Modular saw frame Space-saving split-frame design for frame movement in narrow access ways. n/a n/a Dual support rail Frame with extra support rail for the secure cutting of thin panel materials. optional optional Electromechanically driven, grooved MDF support panel for full frame thin panel support. optional optional PLC Control PLC Control Simple programming of horizontal cutting cycles through modern programmable logic control (PLC). Machine status and other information are available whenever needed. n/a n/a Touchscreen display The computerized touchscreen with 8.4” color display reduces the number of manual control buttons to a minimum. An easy touch of the screen is sufficient to operate all of the functions. All of the operation data and more are retrievable at a moment’s notice. n/a n/a
SVP 950M SVP 950A Length: 6550 mm 6550 mm Width: 1500 mm 1500 mm Height: 3000 mm 3000 mm Max. Vertical Cut: 2200 mm 2200 mm Max. Horizontal Trim Height: 2100 mm 2100 mm Max. Cutting Length: 5300 mm 5300 mm Max. Cutting Depth: 80 mm 80 mm Connection for dust extraction unit *: 2 x 100 mm Ø 2 x 100 mm Ø Motor Capacity: 7,5 PS (5,6 kW) 7,5 PS (5,6 kW) Saw Blade Diameter: 300 mm 300 mm Saw Blade Speed (Revolutions Per Min.): 5000 U/min. 5000 U/min. Diameter of saw scorer: - -
* with ECO dust extraction unit 1 x 160 mm Ø + 1 x 100 mm Ø
with NEW ECO extraction unit 3 x 100 mm Ø